 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| |
|
|
 |
| SOFT SOLUTION |
Softened water protects household appliances & sanitary fittings making them look new, always. Gives your clothes, skin and hair a soft feel. |
| |
The Problem |
|
|
The Solution |
 |
Scaling of heating elements of geysers and steam irons results in increase in electricity bills. |
|
|
Saves water and salt |
|
White powdery precipitation spoils expensive pipe fittings, taps, basins, sinks, flush tanks and floorings. |
|
|
Reduces water and salt wastage by recharging only when necessary. |
|
Scale stains cloths, utensils, glassware and cutlery. |
|
|
It controls the water pump operation so that there is no shortage or wastage of soft water. |
|
Leads to excessive consumption of soap, detergent and shampoo. |
|
|
Save Electricity |
|
Causes hairfall |
|
|
Fills your softened water tank quickly and recharge in the minimum possible time. |
A water softener reduces the calcium or magnesium ion concentration in hard water. These "hardness ions" cause three major kinds of problems. The metal ions react with soaps and calcium sensitive detergents, hindering their ability to lather properly and forming an unsightly precipitate the familiar scum or "bathtub ring". Presence of "hardness ions" also inhibits the cleaning effect of detergent formulations. More seriously, calcium and magnesium carbonates tend to adhere to the surfaces of pipes and heat exchanger surfaces. The resulting scale build-up can restrict water flow in pipes. In boilers, the deposits act as thermal insulation that impedes the flow of heat into the water; this not only reduces heating efficiency, but allows the metal to overheat which, in a pressurized system, can lead to failure. The presence of ions in an electrolyte can also lead to galvanic corrosion, in which one metal will preferentially corrode when in contact with another type of metal. The use of water softeners can aggravate this and cause sacrificial anodes in hot water heaters to corrode more quickly. |
 |
Conventional water-softening devices intended for household use depend on an ion-exchange resin in which "hardness" ions trade places with sodium ions that are electro statically bound to the ionic functional groups of the polymeric resin. A class of minerals known as zeolites also exhibits ion-exchange properties; these minerals were widely used in earlier water softeners.
Water softeners are typically used when water is supplied from wells. Public water systems are also susceptible to hard water, although this is much less common.
Most and least tolerable chemical impurities in water are the hardness producing ions, calcium and magnesium in different concentrations. And they are responsible for the hard scale that deposits and builds up in boiler tubes, pipe lines, condensers jackets, circulating system, cooking utensils and other equipment contracted by hot water.
The Water Vatika Softener is used primarily to produce Zero soft water by highly acidic cation exchanger, which removes calcium and magnesium ions. Which are dissolved hardness producing compounds in the water and are replaced by sodium ions?
The Water Vatika series of water softeners are designed for counter current regeneration with up flow rate and co-current regeneration with down flow rate.
Water Vatika series softeners are designed for longer operating cycles, low regeneration cost. The systems incorporate the proven technique Of counter and co-counter currant regeneration flow rate to economically to suit the demand of soft water for medium scale industries and commercial use. APPLICATION Boiler & Cooling water feed. Process water for chemical & textile. Hospital/Hostels/Homes/Commercial & institutional waterpower plants/Ice plant.
|
|
|
|
|
|
|
 |
|
| Phone: +91-11-26387562 |
Mobile: +91-9312245241 |
Copyright © 2007 www.watervatika.com |
Fax: +91-11-26387563
|
|
|
|
